VirtuaTilt Wiki › Visual Pinball X on Meta Quest with VirtuaTilt Bridge
Visual Pinball X on Meta Quest with VirtuaTilt Bridge
Visual Pinball X runs on the Meta Quest by itself, with no PC. With firmware v8.0.26 and our free app VirtuaTilt Bridge, your Wireless VirtuaTilt works there with everything: buttons, plunger, nudge, the flipper solenoids, the bumpers/slingshots solenoid and the shaker motor. Over Bluetooth with no cable, or with the USB cable.
The step-by-step guide has its own page: vtbridge.3dptronics.com. It covers the installation of Visual Pinball X and VirtuaTilt Bridge on the Quest, your tables, the buttons, the picture settings and the problems you can meet.
A Wireless VirtuaTilt with firmware v8.0.26 or later, on both chips (see Appendix A: Firmware Update). VirtuaTilt Bridge works on a Wireless VirtuaTilt, or on a Wired VirtuaTilt with the Wireless Kit.
The VirtuaTilt must be activated for VirtuaTilt Bridge. You do it once: see Activate your VirtuaTilt.
VirtuaTilt Bridge 1.4.0 or later and the official Visual Pinball X app for the Quest. VirtuaTilt Bridge is in the Meta Quest package, in the private Google Drive folder that VirtuaTilt owners have access to. Visual Pinball X is a free download from its project on GitHub: the guide has the link. Neither app is in the Meta Quest Store.
A Meta Quest 2, Quest Pro, Quest 3 or Quest 3S. We tested it on the Meta Quest 3.
For the USB cable: a USB-A → USB-C OTG adapter. Over Bluetooth you don't need it.
Over Bluetooth, the pairing stays after a firmware update, unless you flashed the ESP32 by USB with Erase + Flash. If VirtuaTilt Bridge then says “Found, but not usable”, do what the window says under it; if it stays, remove the VirtuaTilt in the Quest’s Bluetooth settings and pair it again.
After a new Bluetooth pairing, or a change between the USB and the Bluetooth profile, press Set up in VirtuaTilt Bridge and restart the Quest at once. A table opened before the restart undoes Set up, and the buttons do nothing in the game. VirtuaTilt Bridge tells you when Set up is needed.
VirtuaTilt Bridge works only with a VirtuaTilt: each time it connects, it checks the cabinet. Firmware v8.0.26 and VirtuaTilt Bridge 1.4.0 work together: update both. With older firmware the app says “It needs firmware v8.0.26 or later”, and an older app does not work with this firmware. On a cabinet that is not activated it says “Not activated yet”: see Activate your VirtuaTilt.
If VirtuaTilt Bridge stops or the Bluetooth link drops, the solenoids and the shaker turn off within about one second.
Over Bluetooth, buttons, plunger, nudge and feedback all go over one link. In our tests it felt the same as the cable.
NOTE: We support the VirtuaTilt, its profiles and VirtuaTilt Bridge. We don't support Visual Pinball X: it is the work of its authors, who know it best. If you find a bug in Visual Pinball X, report it to its team on GitHub.