VirtuaTilt Wiki › Activate Nightmode function

Activate Nightmode function

Night Mode lets you silence the cabinet's mechanical feedback instantly — ideal for late-night play or any time you want to keep things quiet. It is built into the firmware and works on every profile on your Wireless VirtuaTilt (Bluetooth and USB alike) — there is nothing to install, map or configure.

Turning Night Mode on and off¶

• To activate: press and hold the white button (bottom-left) for 5 seconds.
• To deactivate: press and hold the same white button again for 5 seconds.

It is a simple hold-to-toggle: hold to switch Night Mode on, hold again to switch it off. The setting stays in effect until you toggle it back.

What Night Mode does¶

While Night Mode is active, all feedback devices are disabled — both the solenoids and the shaker motor — so the cabinet stays completely silent. Everything else keeps working normally: buttons, plunger and nudge respond as usual, and the profile-identity LED stays lit. Night Mode mutes only the mechanical feedback; it does not change anything else.

NOTE: Night Mode is the quickest way to silence the whole cabinet at once. If instead you want to permanently fine-tune (rather than fully mute) the feedback strength, use the Solenoid and Shaker chapters above.

The interactive VirtuaTilt wiki adds a 3D model, a theme gallery and a built-in AI assistant — open the wiki.

Last updated: 2026-08-26

VirtuaTilt is designed and manufactured by 3DPTronics — see the Wireless VirtuaTilt controller. Diagnose your own cabinet with the free VirtuaTilt extension for Claude.