VirtuaTilt Wiki › Pinball FX VR 1.10: Two-Stage Flippers

Pinball FX VR 1.10: Two-Stage Flippers

Pinball FX VR 1.10 (the Judge Dredd update) gave the tables two-stage flippers: the lower flipper and the upper flippers now have separate inputs. Profiles made for older versions lift only the lower flippers, and in the XA profiles the Green button raises the upper left flippers by itself. Use these profiles: Legend — FX VR / Meta Quest only: XA abbreviates the device name X-Arcade shown in Quest Bluetooth settings; XAM means the game's compatibility mode.

Mode in Pinball FX VR	USB profile	Bluetooth profile	Bluetooth name
XAM	VTConfig-USB-FXVR_XAM_v1.2 or later	VTConfig-BT-FXVR_XAM_v1.1 or later	XA
Normal mode (Analog)	VTConfig-USB-FXVR-Analog_v1.1 or later	— (over Bluetooth use XAM)	—

XA profiles¶

• Each flipper button moves the lower and the upper flippers together.
• The plunger works as before: the launch strength follows how far you pull it.
• The Green button no longer sends a key, because its old key is now a flipper input.
• Activate XAM at the main menu as usual (controllers aligned, both flipper buttons).
• Known game bug: after Play again (left flipper button) the left flipper stops responding. It is a Pinball FX VR 1.10 bug, not the cabinet's: until Zen fixes it, choose Restart Table in the game menu to get it back.

Analog profile (USB)¶

• Select Normal mode in Pinball FX VR, not XAM. There is nothing to activate.
• Each flipper button moves the lower and the upper flippers together. The nudge is analog: the harder you push the cabinet, the harder the table is nudged.
• Launch the ball with the Yellow button or a full pull of the plunger. Hold the Center button for half a second to open the menu. Choose the table and use the menus with the Quest controllers. The shaker is not used.

Over USB, connect the cabinet to the Quest with a USB-A → USB-C OTG adapter. Over Bluetooth, forget the old pairing on the Quest and pair again after loading the profile (see "Pairing Your VirtuaTilt with a Meta Quest").

Slot 2 (Green button): cabinets shipped before this update have the older Bluetooth XA profile in slot 2. Upload the new one to slot 2 in GUIConfigTool → Profiles tab.

The Standard Mode profiles (VTConfig-USB-FXVR, VTConfig-BT-FXVR) are no longer included: in Pinball FX VR 1.10 they can leave the flippers raised. VTConfig-BT-FXVR-Analog is no longer included either: over Bluetooth it moves only the lower flippers in Pinball FX VR 1.10. If you have it from an earlier package, use VTConfig-BT-FXVR_XAM over Bluetooth, or VTConfig-USB-FXVR-Analog over USB for the analog nudge.

Key map: see Default Buttons Mapping.

The interactive VirtuaTilt wiki adds a 3D model, a theme gallery and a built-in AI assistant — open the wiki.

Last updated: 2026-10-28

VirtuaTilt is designed and manufactured by 3DPTronics — see the Wireless VirtuaTilt controller. Diagnose your own cabinet with the free VirtuaTilt extension for Claude.